No products in the cart.
N205.627 Nexans LANmark_OF_Duplex_LC_Snap_In_Adaptor_Singlemode
N205.627 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
$ 10.13N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
N890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated ļ¬bres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well ļ¬xed around the splice and the metal wire provides strength so that the splice is well protected.$ 137.70N890.092 Nexans LANmark-OF Splice Cassette Cover
N890.092 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques.
The cassette protects the fusion splices and holds them in position. The Nexans ļ¬bre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmark-OF patch panels (N439.*) and LANsense-OF sliding preloaded patch panels (N883.2B*). These splice cassettes are ļ¬xed to each other at the back of the cassettes with the provided hinges. This feature facilitates the inspection after installation since the cassettes can be lifted and tilted.$ 3.68N890.090 Nexans LANmark-OF Splice Cassette Heat Shrink Protectors
N890.090 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques. The cassette protects the fusion splices and holds them in position. The splice cassettes with heatshrink protectors can be used for both 250 and 900 Āµm coated ļ¬bres. Hence these cassettes are compatible with LANmarkĀOF Tight Buffer, Loose Tube and MicroĀBundle cables. Splicing with heat shrink protectors can also be used for both LANmark OF Maxistrip and Tight Buffer Pigtails. The cassettes have 12 splice positions. When using LANmarkĀOF Maxistrip Pigtails 2 protectors can be stacked on top of each other increasing capacity to 24 splices per cassette. The Nexans ļ¬bre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmarkĀOF patch panels (N439.*) and LANsense OF sliding preloaded patch panels (N883.2B*). TheĀ spliceĀ cassettesĀ areĀ ļ¬xedĀ toĀ eachĀ otherĀ atĀ theĀ backĀ ofĀ theĀ cassettesĀ withĀ the
provided hinges. This feature facilitates the inspection after installation since the cassettesĀ canĀ beĀ liftedĀ andĀ tilted.
The cassette facilitates 2 rings of routing: an inner ring for the ļ¬bres of the pigtails and an outer ring for the ļ¬bres of the cable.$ 12.44N121.5MLA Nexans LANmark-OF Pigtail LC OM3 Maxistrip LSZH 50/125 1m Aqua
N121.5MLA Nexans
DESCRIPTION
Pigtail characteristics
ā¢ FibreĀ assemblyĀ toĀ terminateĀ cableĀ withĀ fusionĀ splicing
ā¢ SuitableĀ forĀ useĀ inĀ patchĀ panelsĀ usingĀ spliceĀ cassettes.
ā¢ TheĀ pigtailsĀ canĀ beĀ strippedĀ inĀ oneĀ actionĀ overĀ aĀ longĀ distanceĀ upĀ toĀ 100cm.Fibre type
The LANmarkĀOF OM3 pigtails have LANmarkĀOF OM3 GIGAliteFLEX ļ¬bre inside. This bend insensitive multimode ļ¬bre has a small bend radius of 7,5 mm and is compliant to IEC 60793Ā210, ļ¬bre model A1a.2b.Ā Ā The pigtail jacket is Aqua.Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095)Ā withĀ heatĀ shrinkĀ protectorsĀ (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) withĀ AluminiumĀ protectorsĀ (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or Micro Bundle cables, i.e. with 250 um ļ¬bres. When using tight buffer cables (900 um ļ¬bres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is ļ¬xed on the 250 um coating after stripping the 900 um coating.Ā Ā Fixing the pigtail on the 900 um coating willĀ leadĀ toĀ improperĀ alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area beforeĀ insertionĀ inĀ theĀ spliceĀ tool.
$ 5.36
4155110 RITTAL Cabinet Universal Light with Socket
RITTAL 4155110
Technical
Description Compact fluorescent tube 18 W with high luminosity.
Benefits Simple, fast assembly
Installation options TS horizontal section of the roof frame: direct
TS, SE vertical section: with TS adaptor bracket
SE sections at the front and rear of the roof frame: with TS adaptor bracket
SE extrusions at the side of the roof frame: direct
AE, CM, TP: with universal bracket
AE: with rail for interior installation
Material Plastic
Supply includes Universal light
Integral motion detector
Light
Light cover
Assembly parts
Dimensions Width: 345 mm
Height: 95 mm
Depth: 55 mm
Rated operating voltage 110 V – 240 V, 1~, 50 Hz/60 Hz
Equipment (electrical) Ballast: Wide-range electronic ballast
Light: Compact fluorescent lamp, base 2G11
Jack/socket (type): D, earthing-pin (type F, CEE 7/3)
Integral motion detector: yes
Switch (type): Integral, on/off/motion detector mode
Operating temperature Operation (environment): -15Ā°C…+45Ā°C
Bearing: -20Ā°C…+70Ā°C
Power consumption 18 W
Rated insulation voltage 250 V AC
Rated impulse withstand voltage, phase
to phase
2500 V AC
Protection category I (PE conductor)
Light – installation type Screw-fastening
Connection options Power supply via connectors
Through-wiring (creating rows of lights)
Light cover yes$ 207.74N205.617 Nexans LANmark-OF Snap-In Adaptor
N205.617 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark-OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
$ 5.85$ 6.53N205.617 Nexans LANmark-OF Snap-In Adaptor
$ 5.85$ 6.53N439.4SNB Nexans LANmark-OF Sliding Patch Panels
N439.4SNB Nexans
DESCRIPTION
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using Splice Cassette / pigtailed terminations. Accepts pre-terminated cable assemblies.$ 78.96$ 83.04N439.4SNB Nexans LANmark-OF Sliding Patch Panels
$ 78.96$ 83.04
N420.66A Nexans LANmark-6A Snap-In Connector
N420.66A Nexans
DESCRIPTION
Application
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the latest Category 6A speciļ¬cations deļ¬ned in the International and American cabling standards and are designed to meet or exceed the stringent quality and performance criteria needed to support all applications up to 500 MHz, including 10 Gigabit Ethernet. A fully closed metal rear cover providing 360 degrees shielding offers excellent coupling attenuation and ensures immunity from Alien Crosstalk and other external interferences. Channels built with LANmark-6A cables and jacks do not need on site testing for Alien Crosstalk, as this parameter is met by design. This signiļ¬cantly reduces the installation
cost for 10G network cabling.ā¢ 10 BASE-T Ethernet
ā¢ 100 BASE-T Fast Ethernet
ā¢ 1000 BASE-T Gigabit Ethernet
ā¢ 10G BASE-T Gigabit Ethernet IEEE 802.3
ā¢ 155 Mbit ATM
ā¢ 1.2 Gbit ATM
PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC 60512-99-002/ed.1 draft (test 99b).$ 6.26N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04N11A.U1F030OK Nexans LANmark-6A Ultim Patch Cord 3 mtr
N11A.U1F030OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an)
and any other future Cat.6A application.
LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched
with other LANmark-6A components to provide improved data throughput in complex
channel conļ¬gurations. Ultim cords use stranded cable and as such provide maximum
system ļ¬exibility for the use at Cross Connects and Consolidation points.
They will also maximise the lifetime and longevity of the system by minimising the risk
of wear & tear damage. Due to their good electrical performance and mechanical
stability, LANmark-6A Ultim cords can be used for accurate ļ¬eld testing of Cat 6A
cabling channels. .
Ultim Cords feature a slim boot for mechanical protection, which is kept inside the
RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit.
They also come with a āReplaceableā Latch Protector, which can be used for colour
coding of different services.$ 9.53$ 10.07N11A.U1F030OK Nexans LANmark-6A Ultim Patch Cord 3 mtr
$ 9.53$ 10.07N11A.U1F020OK Nexans LANmark-6A Ultim Patch Cord, 2 Meters
N11A.U1F020OK Nexans
DESCRIPTION
Application
LANmark-6A Ultim cords are developed to support 10 Gigabit Ethernet (IEEE 802.3an) and any other future Cat.6A application. LANmark-6A Ultim Cords offer superior performance up to 500MHz and are matched with other LANmark-6A components to provide improved data throughput in complex channel conļ¬gurations. Ultim cords use stranded cable and as such provide maximum system ļ¬exibility for the use at Cross Connects and Consolidation points. They will also maximise the lifetime and longevity of the system by minimising the risk of wear & tear damage. Due to their good electrical performance and mechanical stability, LANmark-6A Ultim cords can be used for accurate ļ¬eld testing of Cat 6A cabling channels. Ultim Cords feature a slim boot for mechanical protection, which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a āReplaceableā Latch Protector, which can be used for colour coding of different services.$ 8.44$ 9.26
