No products in the cart.
VWIC2-2MFT-T1/E1 Cisco 2-Port 2nd Gen Multiflex Trunk Voice/WAN
Cisco VWIC2-2MFT-T1/E1
VWIC2-2MFT-T1/E1Â Specification
General InformationManufacturer: Cisco Product ID: VWIC2-2MFT-T1/E1 Product Description: 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card – T1/E1 Product Type: Voice/WAN Interface Card Marketing InformationThe Cisco 2-port T1/E1 multiflex interface cards provide voice and data access to the PSTN domain through TDM ports. They are dual-port trunk interfaces for voice, data, and integrated voice and/or data applications. These cards provide basic structured service for T1 or E1 networks and unstructured service for fractional E1 networks. The cards include an integrated DSU/CSU. Some cards also support the drop-and-insert process, which adds data to a T1 or E1 data stream, or which terminates data from a T1 or E1 data stream to other devices connected to the drop-and-insert equipment. Technical InformationApplication/Usage: Voice Interfaces/PortsInterfaces/Ports: 2 x T1/E1 WAN Interfaces/Ports Details: 2 x RJ-48C T1/E1 WAN Media & PerformanceConnectivity Media: Category 5 STP/UTP Data Transfer Rate: 1.54 Mbps T1
2.05 Mbps E1Management & ProtocolsManagement: - MIB and Simple Network Management Protocol (SNMP)
Protocols: SNMP Controls/IndicatorsStatus Indicators: - AL, LP, CD
MiscellaneousAdditional Information: - The card include an integrated data service unit/channel service unit (DSU/CSU)
- Shielded cables STP Cat 5 should be used on E1 ports
- Full support for T1 Facility Data Link (FDL)
- Controller local loopbacks
- Controller remote loopbacks
- Firmware to support T1 and E1 Layer 1 homologation
- User-initiated VWIC reset and field-programmable gate array (FPGA) download
- Voice support (includes DS0-group and PRI-group configuration)
- Drop and insert capability
- MFT VWIC2s have an onboard slot for a multiflex trunk dedicated echo cancellation module (EC-MFT-32 and EC-MFT-64), offering an enhanced echo cancellation capability for demanding network conditions.
Compatibility: - Cisco 2600XM series, Cisco 2691, Cisco 2800 series, Cisco 3700 series, and Cisco 3800 series routers
- Cisco 1700 Series Modular Access Routers
Supported Network Module:
- NM-HDV
- NM-HDV2
- NM-HD-2VE
- NM-2W
- NM-1FE1R2W
- NM-1FE2W-V2
- NM-2FE2W-V2
Certifications & Standards: - ITU-T G.164
- ITU-T G.165
- ITU-T G.168
- RFC 1406
MIBs:
- RFC 1406 MIB
- T1 CSU MIB Support
- Port Module MIB
- T1/E1 Line Status Reporting
$ 800.50WS-C2960+24LC-S Cisco Switch LC-S 24 Port
Cisco Switch WS-C2960+24LC-S
Specifications
Type Fixed Topology Ethernet (10/100BaseTX)
Ethernet (10/100/1000BaseT)
Gigabit Ethernet (SFP)Maximum Port density 8 10/100 PoE ports, 16 10/100 ports Uplinks  2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Modular/Expansion Slots n/a Architecture Layer 2 Switching (basic connectivity), Voice Enabled Form Factor Fixed, Rack Mountable, Standalone/Clustering Dimensions 1.73 x 17.5 x 13 in. DRAM 64 MB $ 1,421.84WS-C2960+24LC-S Cisco Switch LC-S 24 Port
$ 1,421.84WS-C2960+24TC-S Cisco Switch TC-S 24 Port
Cisco Product Code WS-C2960+24TC-S
Enclosure Type 1 RU
Feature Set LAN Lite
Uplink Interfaces 2 (SFP or 1000BASE-T)
Ports 24 x 10/100 Ethernet Interfaces
Forwarding Bandwidth 16 Gbps
DRAM 128 MB
Flash Memory 64 MB
Dimensions 4.4 x 45.0 x 24.2 cm
Package Weight 7.73 KgSpecification
Configurations
10/100 Ethernet Interfaces – 24
Uplink Interfaces – 2 (SFP or 1000BASE-T)
Cisco IOS Software Feature Set – LAN Lite$ 419.31WS-X4248-RJ45V Cisco Switch 48 ports
Cisco WS-X4248-RJ45V
â—Ź 48 ports
â—Ź 10/100 (RJ-45)
â—Ź Cisco IOS Software Release 12.2(18)EW or later
â—Ź IEEE 802.3af PoE and Cisco prestandard
â—Ź Enterprise and commercial: designed to power IP phones, wireless base stations, video cameras, and other IEEE-compliant powered devices
$ 228.71WS-X4248-RJ45V Cisco Switch 48 ports
$ 228.712960CX-8TC-L Cisco 8 – Port Compact Switch Layer 2 – 8 x 10/100/1000 Ethernet Ports, 2 SFP&Amp;2GE
Cisco 2960CX-8TC-L
Cisco Catalyst 2960-CX 8 – port compact Switch Layer 2 – 8 x 10/100/1000 Ethernet Ports, 2 SFP&2GE uplinks- LAN Base – Managed Product Code WS-C2960CX-8TC-L Feature Set LAN Base Uplink Interfaces 2 x 1G copper plus 2 x 1G SFP Ports 8 x 10/100/1000 Gigabit Ethernet ports Forwarding Bandwidth 12 Gbps Switching Bandwidth (full-duplex capacity) 24 Gbps RAM 512 MB Flash Memory 128 MB Dimensions 4.44 x 26.9 x 21.3 cm Package Weight 4.38 Kg $ 667.083560CX-12PC-S Cisco Switch 12 Ports Managed Rack Mountable
Cisco 3560CX-12PC-S
Cisco Switch 12 Ports Managed Rack Mountable
GENERAL
- Enclosure TypeDesktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- SubtypeGigabit Ethernet
- Ports12 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP
- Power Over Ethernet (PoE)PoE+
- PoE Budget240 Watt
- Jumbo Frame Support9018 bytes
- Authentication MethodKerberos, RADIUS, Secure Shell (SSH), TACACS+
- RAM512 MB
- Authentication MethodKerberos, Secure Shell (SSH), RADIUS, TACACS+
- Power Over Ethernet (PoE)PoE+
- Status IndicatorsPort status, port transmission speed, port duplex mode, system, link/activity
- Routing ProtocolRIP-1, RIP-2, static IP routing
- Jumbo Frame Support9018 bytes
- PoE Budget240 W
- ManufacturerCisco
$ 1,067.33DKÂ 5502.020 RITTAL Fan Mounting Plates Including Thermostat
RITTAL DKÂ 5502.020
Fan mounting plates including thermostatProduct description
Description: For active ventilation of the TS IT. For use in the cut-out integrated into the roof plate. The unit
may optionally be extended with additional fans.
Applications: For active ventilation.
Colour: RAL 7035
Supply includes: Fan unit
2 fans
1 thermostat
Open connection cable
Assembly parts
Note: For use in the cut-out integrated into the roof plate.
Connection via distributor box or country-specific connector.
Packs of: 1 pc(s).
EAN: 4028177679252
Customs tariff
number:84145100
Product features
Rated operating voltage:250 V
Dimensions: Width: 340 mm
Height: 54 mm
Depth: 550 mm$ 248.32DK 5501.040 RITTAL Cabinet Side Panels
RITTAL DK 5501.040
Side panels, divided with lockable quick-release fastener
Product description
Benefits:Easy to use
Tool-free assembly
Quick-release fastener including security lock 3524 E.
Internal latch included (no key required)
Lock with chassis, cable clamp rail may be top-mounted on the outer mounting level.
Applications:
Suitable for IT climate control and rack extinguishing.
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL 7035
Supply includes:
Console
Pedestal
Earth conductor
Assembly parts
Packs of:
1 pc(s).
EAN:
4028177678736$ 264.384568000 RITTAL Cabinet EYE BOLTS PK OF 4
RITTAL 4568000
PS4568 EYE BOLTS PK OF 4
Technical
Description For crane transportation of enclosures, where not already included in the supply.
Material Sheet steel
Surface finish Zinc-plated C 15 E
Supply includes 4 eyebolts M12
4 serrated lock washers A 12.5
To fit TS
SE
Thread Type: M12
Packs of 4 pc(s).
Weight/pack 0.61 kg
EAN 4028177103122
Customs tariff number 73181900$ 27.23SZ 4315.710 RITTAL Cabinet SZ Door-Operated Switch, with Connection Wire for Compact Light, L: 600 mm, Yellow
RITTAL SZ 4315.710
Product description
Version: With connection cable
Product features
Dimensions: Length: 600 mm (24 “)
Rated operating
voltage:400 V
Installation options: for compact lights
For rated current
(max.):240 V AC, 2,5 A
Equipment
(electrical):
Cable color: Yellow
Rated insulation
voltage:400 V AC
Rated impulse
withstand voltage,
phase to phase:6000 V AC
Packaging unit: 1 pc(s).
Weight/packaging
unit:0.12 kg (0.3 lb.)
Copper weight (kg
per piece):0$ 39.674155110 RITTAL Cabinet Universal Light with Socket
RITTAL 4155110
Technical
Description Compact fluorescent tube 18 W with high luminosity.
Benefits Simple, fast assembly
Installation options TS horizontal section of the roof frame: direct
TS, SE vertical section: with TS adaptor bracket
SE sections at the front and rear of the roof frame: with TS adaptor bracket
SE extrusions at the side of the roof frame: direct
AE, CM, TP: with universal bracket
AE: with rail for interior installation
Material Plastic
Supply includes Universal light
Integral motion detector
Light
Light cover
Assembly parts
Dimensions Width: 345 mm
Height: 95 mm
Depth: 55 mm
Rated operating voltage 110 V – 240 V, 1~, 50 Hz/60 Hz
Equipment (electrical) Ballast: Wide-range electronic ballast
Light: Compact fluorescent lamp, base 2G11
Jack/socket (type): D, earthing-pin (type F, CEE 7/3)
Integral motion detector: yes
Switch (type): Integral, on/off/motion detector mode
Operating temperature Operation (environment): -15°C…+45°C
Bearing: -20°C…+70°C
Power consumption 18 W
Rated insulation voltage 250 V AC
Rated impulse withstand voltage, phase
to phase
2500 V AC
Protection category I (PE conductor)
Light – installation type Screw-fastening
Connection options Power supply via connectors
Through-wiring (creating rows of lights)
Light cover yes$ 207.75SZ 4140.010 RITTAL Cabinet Compact Light
RITTAL SZ 4140.010
Cabinet Compact Light
Product description
Benefits: Slimmer: Height and depth reduced by around 50%, takes up 75% less volume than
conventional lights
Faster: Universal quick-release fastening at TS punchings using clips, screws or
powerful magnets (optional). Easy to insert at the sides or rear, fit light and you’re done!
Door-operated switch connection can be made using 2-pole connector
Transparent light cover, fluted on inside
Color: Similar to RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Compact light with clip and screw mounting kits
Light (bulb)
Light cover
Connection cable
Assembly components
Note: Door-operated switch connection can be made using 2-pole connector
Note on Model No.:: Cable deflector across rear possible
Product features
Dimensions: Height: 59 mm (2.3 “)
Width: 455 mm (18 “)
Depth: 24 mm (0.94 “)
Rated operating
voltage:
100 V – 240 V, 1~, 50 Hz/60 Hz
Voltage tolerance: ± 10 %
© Rittal 2020 1
Installation options: TS horizontal profile from roof frames: direct
TS, SE vertical profile, direct
SE profiles to the front and rear of roof frames: direct
SE profiles to the side of roof frames: direct
AE, CM, TP: with magnet mounting kit
AE: with rail for interior installation
Mounting dimensions: Mounting distance – clip/magnet: 400 mm (16 “)
Mounting distance – screw attachment: 475 mm (19 “)
Operating
temperature:
Operation (environment): -15 °C…+45 °C
Storage: -20 °C…+70 °C
Rated current: At 230 V/50 Hz: 0,045 A – 0,088 A
For 110 V/60 Hz: 0,083 A – 0,149 A
Power consumption: 8 W
Equipment
(electrical):
Ballast: Wide range voltage EB
Light (bulb): T5 fluorescent lamp
Length of connection cable: 3 m (118 “)
Cable color: Yellow
Switch (type): Integral, on/off/door-operated switch mode
Rated insulation
voltage:
500 V DC/1s
Rated impulse
withstand voltage,
phase to earth:
1000 V AC
Rated impulse
withstand voltage,
phase to phase:
500 V AC
Protection category: II (total insulation)
Connection options: Integrated connection cable with open end
Door-operated switch
Light – installation
type:
Screw fastening
Clip fastening
Magnetic fastener (accessories)
Cable deflector
across rear possible:
yes$ 173.01