No products in the cart.
8108235 RITTAL TS SIDE PANELS 2000 x 800 RAL7035
RITTAL 8108235
TS SIDE PANELS 2000 x 800 RAL7035
Product description
Benefits: Automatic potential equalization and higher EMC protection thanks to enclosure panel
holders with grounding insert
Easy positioning with the location aid
Grounding bolt with contact surfaceEnclosure type: TS IT
Height: 2000 mm (79 ˝)
Depth: 800 mm (31 ˝)
Packaging unit: 2 pc(s$ 239.59
7827480 RITTAL DK CORNER BRACKET (1PU=2EA)
RITTAL 7827480
DK CORNER BRACKET (1PU=2EA)
Description:
The installation bracket is screw-fastened in the enclosure width on the housing frame. The
profile rail is fastened to the bracket at the top and bottom. For partial enclosure configuration
the installation brackets can be fastened to the TS system chassis, 17 x 73 mm, on the outer
mounting level of the enclosure frame$ 65.34
7827181 RITTAL DK MOUNTING ANGLE L-SHAPED 38U
RITTAL 7827181
DK MOUNTING ANGLE L-SHAPED 38U
DESCRIPTION
Design L-shaped mounting angle
To fit Enclosure type: TS
Height: 1800 mm
Dimensions Width: 19″
Units 38 U
Packs of 2 pc(s).
Weight/pack 4.32 kg$ 76.23
8620034 RITTAL Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth System VX, Sheet Steel
RITTAL 8620034
Base/Plinth Trim Panels, Side, 100 mm for Base/Plinth System VX, Sheet Steel
Description:
To finish off a base/plinth unit at the sides and for additional stabilisation or for the
interior configuration of bayed base/plinths. One 200 mm high or two 100 mm high trim
panels may optionally be fitted on 200 mm high base/plinths.Depth: = 800 mm
Dimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 2.5 kg$ 38.12
8620003 RITTAL Base/plinth corner piece with base/plinth trim panels, Front and Rear, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
RITTAL 8620003
Base/plinth corner piece with base/plinth trim panels, Front and Rear, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
Description:
High-load capacity base/plinth corner pieces with moulded self-positioning to the baying
enclosure system, may be used with or without trim panels depending on the
application. Large openings in the corner piece for optimum access to the screwfastening
point, may be concealed with a corner and baying cover.Product features
To fit: Enclosure type: VX
Width: = 800 mm
Dimensions: Height: 100 mm
Packs of: 2 pc(s).
© Rittal 2019 1
Weight/pack: 4.84 kg$ 46.28
3139100 RITTAL Roof-Mounted Fan, Roof Vent
RITTAL 3139100
Roof-Mounted Fan, Roof Vent
Description:
Roof-mounted fan with a high protection category and flexible installation from the inside
or outside.$ 371.64
7094100 RITTAL M6x16 mm Philip Head Screws + Plastic
RITTAL 7094100
M6x16 mm Philip Head Screws + Plastic
Product description
Description: For electronic equipment, 482.6 mm (19″) installed components and blanking plates.
Supply includes: Plastic washers
Packs of: 50 pc(s).Design: Phillips-head screw
Thread: Type: M6
Length: 16 mm
Weight: 0.01 kg$ 4.90
2092200 RITTAL EL2092 M6 CAGE NUT PACK OF 50
RITTAL 2092200
EL2092 M6 CAGE NUT PACK OF 50
Description:
To fasten slide-in electronic equipment, 482.6 mm (19″) installed equipment and blanking
plates to profile rails. Used with profile plate thicknesses 0.8 – 2.0 mm. For narrow
tolerances,captive nuts for profile plate thicknesses 1.2 – 1.5 mm should be used. Either with
or without contacting the installed equipment with the 482.6 mm (19″) profile/housing.$ 18.51
4597000 RITTAL PS4597 MOUNTING BRACKET (PK 4)
RITTAL 4597000
PS4597 MOUNTING BRACKET (PK 4)
Description
May be screw-fastened onto all enclosures and mounting parts with system punchings on a
25 mm pitch pattern.
Material Sheet steel
Surface finish Zinc-plated
Supply includes Assembly screws
Packs of 4 pc(s).
Weight/pack 0.34 kg$ 28.59
8612100 RITTAL TS PUNCHED SECTIONS EXT. FOR
RITTAL 8612100
TS PUNCHED SECTIONS EXT. FOR
Catalog Description
TS punched section with mounting flange, 17 x 73 mm, For the outer mounting level, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly screws, description: Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply locate into the TS punchings and secure. Packaging Unit: 4 pc(s).
$ 112.99
1936200 RITTAL EL1936 6U BLANKING PLATE PKT-3
RITTAL 1936200
EL1936 6U BLANKING PLATE PKT-3
Description
To neatly finish off free locations within the mounting level.
Material Aluminium
Surface finish Natural anodised
Dimensions Width: 19″
Units 6 U
Packs of 3 pc(s).
Weight/pack 3.38 kg$ 160.64
1931200 RITTAL EL1931 1U BLANKING PLATE PKT-3
RITTAL 1931200
EL1931 1U BLANKING PLATE PKT-3
Description
To neatly finish off free locations within the mounting level.
Material Aluminium
Surface finish Natural anodised
Dimensions Width: 19″
Units 1 U
Packs of 3 pc(s).
Weight/pack 0.56 kg$ 51.73
