No products in the cart.
FBWLCUC11-JXF003 COMMSCOPE Singlemode LC-UC .9MM Pigtail
COMMSCOPE FBWLCUC11-JXF003
Singlemode LC-UC .9MM Pigtail
DESCRIPTION
Color, boot A Blue
Color, connector A Blue
Construction Type Pigtail, jacketed
Interface, Connector A LC/UPC
Jacket Color Yellow
Total Fibers, quantity 1$ 6.81
N116.P1A020OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 2m Orange
N116.P1A020OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 6.81341-1OS2S315 Norden SC APC Pigtail OS2 PVC 1.5m
Norden 341-1OS2S315 SCAPC Pigtail OS2 PVC 1.5m
MECHANICAL DATA
COMPLIANCE
ISO/IEC 11801
EN50173 -1,ANSI TIA/EIA 568B
FIBRE PIGTAIL
Fibre pigtails are used in permanent connections between patch
panels and incoming cables / single blown fibres. Pigtails are preconstructed
with connectors. Connector options include small form
factors such as LC, E2000 and MT-RJ as well as SC, FC and ST. These are
based on 900μm tight buffered cores (600μm MT-RJ) and suitable for
internal use only inside suitable Fibre Management Systems
www.nordencommunication.com
Fibre System
Crush (N) 800
Impact (Nm) 0.2
Operating Temperature -10°C to +70°C
Installation temperature 0°C to +70°C
Temp – Installation 0°C to +70°C
Bend Radius 50mm (min)
Fibre Type Max. Attenuation
(dB/km)
850nm 1300nm 1310nm 1550nm
OM1 62.5/125μm ≤2.7 ≤0.6 – –
OM2 50/125μm ≤2.5 ≤0.7 – –
OM3 50/125μm ≤2.3 ≤0.6 – –
OM4 50/125μm ≤2.3 ≤0.6 – –
OS1 9/125μm – – ≤0.34 ≤0.20
OS2 9/125μm – – ≤0.34 ≤0.24
Min. Overfill Launch
Bandwidth
(Mhz•km)
Min. Gigabit Ethernet Link
Distance (m)
Gigabit 10Gigabit
850nm 1300nm 850nm 1300nm 850nm
≥200 ≥600 275 550 –
≥500 ≥500 550 550 –
≥1500 ≥500 1000 600 300
≥3500 ≥500 1000 600 550
– – – – –
– – – – –
OPTICAL PERFORMANCE DATA (CONNECTOR)
ORDERING INFORMATION
ORDERING GUIDE
www.nordencommunication.com
Fibre System
FIBRE PIGTAIL
Description Part Number
Singlemode OS2
SC/APC 1m PVC SC/APC OS2 PVC 1M PIGTAIL 341-1OS2S310
SC/APC 1.5m PVC SC/APC OS2 PVC 1.5M PIGTAIL 341-1OS2S315
SC/APC 2m PVC SC/APC OS2 PVC 2M PIGTAIL 341-1OS2S320
SC/APC 3m PVC SC/APC OS2 PVC 3M PIGTAIL 341-1OS2S330
SC/APC 1m LSZH SC/APC OS2 LSZH 1M PIGTAIL 342-1OS2S310
SC/APC 1.5m LSZH SC/APC OS2 LSZH 1.5M PIGTAIL 342-1OS2S315
SC/APC 2m LSZH SC/APC OS2 LSZH 2M PIGTAIL 342-1OS2S320
SC/APC 3m LSZH SC/APC OS2 LSZH 3M PIGTAIL 342-1OS2S330$ 6.81
309026 Datwyler Cat 6 ,RJ45 PC, 4m, UTP PVC Grey
309026 Datwyler Cat 6 ,RJ45 PC, 4m, UTP PVC Grey
DESCRIPTION
RJ45 patch cord, Cat.6 (up to 250 MHz), unshielded, with a RJ45 plug (Cat.6) and a moulded anti-snag boot on both ends. Unshielded flexible cable U/UTP, 250 MHz, 4P, AWG 24. Cable sheath made of FR/PVC, also available as FRNC/LS0H. RJ45 plugs (8/8) Cat.6 in accordance with IEC 60603-7-4.
$ 6.32
CPC3392-03F003 COMMSCOPE Cat6 Modular Patch Cord, 3FT
COMMSCOPE CPC3392-03F003
Cat6 Modular Patch Cord, 3FT
DESCRIPTION
ANSI/TIA Category 6
Cable Type U/UTP (unshielded)
Conductor Type Stranded
Jacket Color Dark gray
Pairs, quantity 4$ 6.26
FBXLCUC11-MXF003 COMMSCOPE MULTIMODE LC-UC .9MM PIGTAIL
COMMSCOPE FBXLCUC11-MXF003
MULTIMODE LC-UC .9MM PIGTAIL
General Specifications
Color, connector A Beige
Construction Type Pigtail, jacketed
Interface, Connector A LC/UPC
Total Fibers, quantity 1$ 6.26
N420.66A Nexans LANmark-6A Snap-In Connector
N420.66A Nexans
DESCRIPTION
Application
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the latest Category 6A specifications defined in the International and American cabling standards and are designed to meet or exceed the stringent quality and performance criteria needed to support all applications up to 500 MHz, including 10 Gigabit Ethernet. A fully closed metal rear cover providing 360 degrees shielding offers excellent coupling attenuation and ensures immunity from Alien Crosstalk and other external interferences. Channels built with LANmark-6A cables and jacks do not need on site testing for Alien Crosstalk, as this parameter is met by design. This significantly reduces the installation
cost for 10G network cabling.• 10 BASE-T Ethernet
• 100 BASE-T Fast Ethernet
• 1000 BASE-T Gigabit Ethernet
• 10G BASE-T Gigabit Ethernet IEEE 802.3
• 155 Mbit ATM
• 1.2 Gbit ATM
PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC 60512-99-002/ed.1 draft (test 99b).$ 6.26
N420.66A Nexans Connector Category 6A
N420.66A Nexans
Connector Category 6A
DESCRIPTION
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the
latest Category 6A specifications defined in the International and American cabling
standards and are designed to meet or exceed the stringent quality and performance
criteria needed to support all applications up to 500 MHz, including 10 Gigabit
Ethernet.
A fully closed metal rear cover providing 360 degrees shielding offers excellent
coupling attenuation and ensures immunity from Alien Crosstalk and other external
interferences.
Channels built with LANmark-6A cables and jacks do not need on site testing for Alien
Crosstalk, as this parameter is met by design. This significantly reduces the installation
cost for 10G network cabling.
· 10 BASE-T Ethernet
· 100 BASE-T Fast Ethernet
· 1000 BASE-T Gigabit Ethernet
· 10G BASE-T Gigabit Ethernet IEEE 802.3
· 155 Mbit ATM
· 1.2 Gbit ATM
PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC
60512-99-002/ed.1 draft (test 99b)$ 6.26N205.617 Nexans Duplex LC Snap-In Adaptor Multimode Aqua
11.4mm
Technical Specifications
Insertion Loss: < 0.2 dB
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf)$ 6.26NKFP91BN1NNM001 Panduit LC SM OS2 Pigtails
NKFP91BN1NNM001 Panduit
DESCRIPTION
NetKey® Fiber Optic Patch Cords include duplex LC, SC, and ST connectors on both ends and pigtails include simplex LC, SC, and ST on one end, and open (un-terminated) on the other end. Patch cords and pigtails meet requirements of TIA/EIA-568-C.3-1. The fiber connectors are FOCIS compliant or compatible and meet the requirements of TIA/EIA-455-21A. Quality control reference label provides lifetime traceability of test data.
$ 5.99N205.617 Nexans LANmark-OF Snap-In Adaptor
N205.617 Nexans
DESCRIPTION
LANmark-OF Snap-In adaptors have been designed for installation into the LANmark-OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of the traditional adaptors.
$ 5.85$ 6.53N205.617 Nexans LANmark-OF Snap-In Adaptor
$ 5.85$ 6.53SCSJAC6AUTPBK Opterna 180° Cat 6A Unshielded Keystone jack with T568A/B label, Black
SCSJAC6AUTPBK Opterna
DESCRIPTION
Opterna category 6 unshielded jacks are designed and manufactured to meet and exceed the current and future requirements for high bandwidth and forms an essential element of the structured cabling system. The keystone jacks are highly reliable and offers optimal network performance.
The jack forms part of the faceplate as well as part of the modular patch-panel. Clear wire retaining caps are supplied which provide additional cable strain relief.
The keystone jacks are color-coded for both 568A and 568B standards and can be terminated using a standard 110 termination tool.
Standards
• ANSI/TIA-568-C-2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-4$ 5.72
