No products in the cart.
LBC3080/01 BOSCH Metal Fire Dome for LHM0606 (Option)
BOSCH LBC3080/01
Metal Fire Dome for LHM0606 (Option)
DESCRIPTION
During a fire, the ceiling cavity can allow fire or smoke to spread throughout a building. To inhibit fire entering the
cavity via the ceiling loudspeaker, it can be fitted with an LBC 3080/01 steel fire dome. This is mounted on the
loudspeaker assembly using four self-tapping screws supplied with the fire dome.$ 13.61LHM0606/10 BOSCH Ceiling Loudspeaker 6W Metal with Clamps
BOSCH LHM0606/10
Ceiling Loudspeaker 6W Metal with Clamps
DESCRIPTION
Suitable for speech and music reproduction
Flush-mounting in ceiling cavity
Easy to install
Simple power setting
Unobtrusive in virtually all interiors$ 17.97
LBB1957/00 BOSCH Call Station Keypad
BOSCH LBB1957/00
Call Station Keypad
DESCRIPTION
Seven zone selection keys
LED indications for zone selection
Up to eight keypads can be connected together$ 301.41LBB1957/00 BOSCH Call Station Keypad
$ 301.41
LBB1956/00 BOSCH Call station, 6-zone
BOSCH LBB1956/00
Call station, 6-zone
DESCRIPTION
Stylish six-zone call station for the Plena Voice Alarm System
Six zone selection keys, all-call key and momentary PTT-key for calls
Selectable gain, speech filter, limiter, and output level for improved intelligibility
LED indications for zone selection, fault, and emergency state
Call station extension provides seven additional zone and zone group keys$ 347.43
LBB1938/30 BOSCH Power amplifier 1x480W
BOSCH LBB1938/30
Power amplifier 1x480W
DESCRIPTION
480 W power amplifier in a 3U high 19” housing
EN 54‑16 certified
70 V / 100 V and 8 Ohm outputs
Dual inputs with priority switching
100 V input for slave operation on 100 V speaker line$ 1,213.55LBB1938/30 BOSCH Power amplifier 1x480W
$ 1,213.55LBB1992/00 BOSCH Router, 6-zone
BOSCH LBB1992/00
Router, 6-zone
DESCRIPTION
Expand the Plena Voice Alarm System with six zones
EN 54‑16 certified
12 additional input contacts
Six volume override output contacts
Supervision within the Plena Voice Alarm System
$ 1,168.89LBB1992/00 BOSCH Router, 6-zone
$ 1,168.89
LBB1990/00 BOSCH Controller, 6-zone
BOSCH LBB1990/00
Controller, 6-zone
DESCRIPTION
Remote control of the Plena Voice Alarm System
EN 54‑16 certified and EN 60849 compliant
Emergency (EMG) microphone and background (BGM) zone selections
EMG state and fault indicators
Call monitoring loudspeaker$ 2,093.28LBB1990/00 BOSCH Controller, 6-zone
$ 2,093.28
SCSPCC6AUTP05MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 5mtr Grey
SCSPCC6AUTP05MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 13.34SCSPCC6AUTP03MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 3mtr Grey
SCSPCC6AUTP03MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 7.90SCSPCC6AUTP02MLSZHGY Opterna Patchcord UTP, category 6A, standard plug, LSZH 2mtr Grey
SCSPCC6AUTP02MLSZHGY Opterna
DESCRIPTION
Opterna UTP Patch cords conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801:2011 edition 2.2 and CENELEC EN 50173 (2011) for Category 6A/Class EA applications.
The products have been tested up to 500 MHz and are designed for high speed protocols such as 10 Gigabit Ethernet (10G) applications.
The patch cords are constructed of a SF/UTP stranded wire cable and comprises two modular plugs at both ends of the cables. The SF/UTP cable eliminate alien-crosstalk near the panel end. The RJ45 plugs are protected with molded snag-less boots that prevents the latch on the RJ45 plugs from getting damaged during installation.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• ANSI/TIA-1096-A (formerly FCC Part 68)
• IEC 60603-7-41$ 6.81SCSAFPUK2WH Opterna Angular Faceplate 86 x 86 mm for 2 Keystone Jack, U.K Standard
SCSAFPUK2WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
STANDARDS
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.63SCSAFPUK1WH Opterna Angular Faceplate 86 x 86 mm for 1 Keystone Jack, U.K Standard
SCSAFPUK1WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
Standards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2)
• CENELEC EN 50173-1:2011
• UL 94 V-0$ 1.36
