No products in the cart.
341-1OS2S315 Norden SC APC Pigtail OS2 PVC 1.5m
Norden 341-1OS2S315 SCAPC Pigtail OS2 PVC 1.5m
MECHANICAL DATA
COMPLIANCE
ISO/IEC 11801
EN50173 -1,ANSI TIA/EIA 568B
FIBRE PIGTAIL
Fibre pigtails are used in permanent connections between patch
panels and incoming cables / single blown fibres. Pigtails are preconstructed
with connectors. Connector options include small form
factors such as LC, E2000 and MT-RJ as well as SC, FC and ST. These are
based on 900μm tight buffered cores (600μm MT-RJ) and suitable for
internal use only inside suitable Fibre Management Systems
www.nordencommunication.com
Fibre System
Crush (N) 800
Impact (Nm) 0.2
Operating Temperature -10°C to +70°C
Installation temperature 0°C to +70°C
Temp – Installation 0°C to +70°C
Bend Radius 50mm (min)
Fibre Type Max. Attenuation
(dB/km)
850nm 1300nm 1310nm 1550nm
OM1 62.5/125μm ≤2.7 ≤0.6 – –
OM2 50/125μm ≤2.5 ≤0.7 – –
OM3 50/125μm ≤2.3 ≤0.6 – –
OM4 50/125μm ≤2.3 ≤0.6 – –
OS1 9/125μm – – ≤0.34 ≤0.20
OS2 9/125μm – – ≤0.34 ≤0.24
Min. Overfill Launch
Bandwidth
(Mhz•km)
Min. Gigabit Ethernet Link
Distance (m)
Gigabit 10Gigabit
850nm 1300nm 850nm 1300nm 850nm
≥200 ≥600 275 550 –
≥500 ≥500 550 550 –
≥1500 ≥500 1000 600 300
≥3500 ≥500 1000 600 550
– – – – –
– – – – –
OPTICAL PERFORMANCE DATA (CONNECTOR)
ORDERING INFORMATION
ORDERING GUIDE
www.nordencommunication.com
Fibre System
FIBRE PIGTAIL
Description Part Number
Singlemode OS2
SC/APC 1m PVC SC/APC OS2 PVC 1M PIGTAIL 341-1OS2S310
SC/APC 1.5m PVC SC/APC OS2 PVC 1.5M PIGTAIL 341-1OS2S315
SC/APC 2m PVC SC/APC OS2 PVC 2M PIGTAIL 341-1OS2S320
SC/APC 3m PVC SC/APC OS2 PVC 3M PIGTAIL 341-1OS2S330
SC/APC 1m LSZH SC/APC OS2 LSZH 1M PIGTAIL 342-1OS2S310
SC/APC 1.5m LSZH SC/APC OS2 LSZH 1.5M PIGTAIL 342-1OS2S315
SC/APC 2m LSZH SC/APC OS2 LSZH 2M PIGTAIL 342-1OS2S320
SC/APC 3m LSZH SC/APC OS2 LSZH 3M PIGTAIL 342-1OS2S330$ 6.81
CS-1/CS-8 100-05 HES Cable External Jellyfilled Screened Armoured 100Pr 0.5mm
HES CS-1/CS-8 100-05
Cable External Jellyfilled Screened Armoured 100Pr 0.5mm
DESCRIPTION
- Telephone Cable with cellular polyethylene insulation, jelly filled with petroleum jelly and a polyethylene coating.
- For use in the Local Distribution network.
- Insulated conductors uniformly twisted together to form a pair.
- The water resistant filling compound is applied to the air spaces within the cable core to provide the water-proofness.
- Wrapping is applied over the cable core.
- A flat aluminium foil coated with copolymer on both sides is applied longitudinally over the core covering as screen.
- Black linear-low density polyethylene compound is extruded over the screen.
$ 12.52
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
HES Cable Jumper Wire 1X0.5 CS13A White/Red Tinned 100m/roll
$ 13.34
121-01P18124B NORDEN Category 6 UTP Patch Panel Blank Punch Down 24 Port
NORDEN 121-01P18124B
Category 6 UTP Patch Panel Blank Punch Down 24 Port
DESIGN & MATERIALS
Panel Type Flat
Panel Style Blank
Mounting Style Punch Down (Module)
Panel Width 483 mm (19”)
Panel Height 1U: 44.2 mm & 2U: 88.4 mm
Panel Depth 109 mm
Outlet Style Unkeyed RJ-45
Outlets 24/48 Port
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, Ul 94 V-0
Cover Colour and Material Black, Powder Coated SteelSTANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability rating UL 94V-0
Safety Rating UL1863
Transmission ISO/IEC 11801:2002 ANSI /TIA/EIA-568.B.2-10$ 14.14
121-01P18124B Norden Cat 6 UTP Patch Panel Blank Punch Down 24 Port
121-01P18124B Norden
DESCRIPTION
Blank UTP Punch Down patch panel from Norden exceeds TIA and ISO component specifications, supporting network convergence protocols, delivering maximum bandwidth and extended reliability for all LAN, multimedia, and Power over Ethernet applications. A rear cable management bar is supplied which acts as a stress reliever for terminated cables. All performance parameters, including NEXT, FEXT Attenuation and Return Loss are designed to meet the Cabling standard. The patch panel comes with mini cable ties, cage nuts and rear cable management bar as standard.
$ 14.16
1331-106E06N001BK NORDEN 6 Way PDU with Main Switch, 13Amp, 1.8mtr, 19” Installation
NORDEN 1331-106E06N001BK
POWER DISTRIBUTION UNIT
DESIGN & MATERIALS
Material of Construction PC/ABS alloy, High Impart FR thermoplastic –UlL94-V0
Shell Material & Colour Aluminium, black
Outlet Qty. 6 way, 8 way, 10 way,12 way, 15 way
Power Input Style Left end single input style
Bracket Installation Style Frontal Installation Style
Control function SwitchLead length 1.8 m, 3 m, 5 m (other cable length available on request)
ELECTRICAL & ENVIRONMENTAL DATA
Current Rating 13A 250VAC
Maximum load current available in 13A
Input frequency 50 or 60 Hz
Maximum load capacity 4KW
Operating Environment -5 °C to +45 °C
Operating Relative Humidity 5 – 95 %
Operating Elevation 0-3000 meters
Storage Temperature -25 °C to +65 °C
Storage Relative Humidity 5 – 95 %
Storage Elevation 0-15000 meters$ 20.67
121-31T18024B NORDEN Category 6 UTP Patch Panel Blank Tool Less 24 Port
NORDEN 121-31T18024B
Category 6 UTP Patch Panel Blank Tool Less 24 Port
DESIGN & MATERIALS
Panel Type Flat
Panel Style Blank
Mounting Style Tool Less (Module)
Panel Width 483 mm (19”)
Panel Height 1U: 44.0 mm, 2U: 88.4 mm
Panel Depth 79.5 mm
Outlet Style Unkeyed RJ-45
Outlets 24 & 48 Ports
IDC Contact 45° secure, gas tight connection
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, UL 94 V-0
Cover Colour and Material Black, Powder Coated Steel
STANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability rating UL 94V-0
Safety Rating UL1863$ 24.25
121-31V18012L NORDEN Category 6 UTP Vertical Patch Panel Loaded 12 Port
NORDEN 121-31V18012L
CATEGORY 6 UTP PATCH PANELVERTICAL LOADED 12P
DESIGN & MATERIALS
Panel Type Vertical
Panel Style Loaded
Mounting Style Punch Down (Module)
Panel Width 57 mm
Panel Height 255 mm
Panel Depth 40 mm
Outlet Style Unkeyed RJ-45
Outlet 12 Port
Angle 180 Degree
Connector Module Holder 110 Style IDC Termination
Panel Holder Material Plastic & Metal
Cover Colour and Material Black, Powder Coated Steel
STANDARDS
Wiring Standards EIA/TIA 568 A/B$ 24.25
T70-2206 HES Distribution Box Int 100pr 301A Empty 160x210x121
HES T70-2206
Distribution Box Int 100pr 301A Empty 160x210x121
FUSION TELECOM CONNECTION BOX
Available in 20, 50, 100 pair NB:
T70-2204 – 20 Pair Connection Box is
supplied with 2 x 10 pair disconnection
modules. T70-0035, T70-2205 and
T70-2206, all require disconnection
strips (T70-2203).
340$ 28.04
121-31P18048B NORDEN Category 6 UTP Patch Panel Blank Punch Down 48 Port
NORDEN 121-31P18048B
Category 6 UTP Patch Panel Blank Punch Down 48 Port
DESIGN & MATERIALS
Panel Type Flat
Panel Style Blank
Mounting Style Punch Down (Module)
Panel Width 483 mm (19”)
Panel Height 1U: 44.2 mm & 2U: 88.4 mm
Panel Depth 109 mm
Outlet Style Unkeyed RJ-45
Outlets 24/48 Port
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, Ul 94 V-0
Cover Colour and Material Black, Powder Coated Steel
STANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability rating UL 94V-0
Safety Rating UL1863
Transmission ISO/IEC 11801:2002 ANSI /TIA/EIA-568.B.2-10$ 30.81121-31A18024B Norden Cat 6 UTP Angled Patch Panel Blank Tool less 24Port
121-31A18024B Norden
DESCRIPTION
The Unshielded angled patch panels are ideal for Data centerapplications where rack space is limited. These ergonomically designed panel provide aesthetic look combined with easy cable management. It exceeds TIA and ISO Component specifications, supporting network convergence protocols delivering maximum bandwidth and extending reliability for LAN, multimedia, and power over Ethernet applications The rear cable management bar also acts as a stress reliever along with the function of managing cable. All performance parameters, including NEXT, FEXT Attenuation and Return Loss are designed to meet the Cabling standard. 19” (1U: 24 port & 2U: 48 port) patch panel comes with mini cable ties, cage nuts and rear cable management bar.
$ 44.38
121-31A18024B NORDEN Category 6 UTP Angled Patch Panel Blank Tool Less 24 Port
NORDEN 121-31A18024B
Category 6 UTP Angled Patch Panel Blank Tool Less 24 Port
DESIGN & MATERIALS
Panel Type Flat
Panel Style Blank
Mounting Style Tool Less (Module)
Panel Width 483 mm (19”)
Panel Height 1U (24 port), 2U (48 port)
Panel Depth 79.5 mm
Outlet Style Unkeyed RJ-45
Outlets 24 Ports & 48 ports
Angle 180 Degree
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, UL 94 V-0
Cover Colour and Material Black, Powder Coated Steel
STANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability Rating UL 94V-0
Safety Rating UL1863
Transmission ISO/IEC 11801:2002 ANSI /TIA/EIA-568.B.2-10$ 44.52
