CL5708M-ATA-AE ATEN 17″ 8P PS/2-USB VGA LCD KVM SW. W/USA
 ATEN CL5708M-ATA-AE
17″ 8P PS/2-USB VGA LCD KVM SW. W/USA
DESCRIPTION
• Exclusive LED illumination light – designed by ATEN to illuminate the keyboard and touchpad to allow visibility in lowlight conditions
• LCD module USB port allows each computer to access USB peripherals
• LCD module rotates up to 115 degrees for a more comfortable viewing angle• Auto PS/2 and USB interface detection
$ 2,039.371323-428813BK NORDEN Floor Standing Cabinet 42U 800 x 800 Front Glass/Back Perf Door
NORDEN 1323-428813BK
Floor Standing Cabinet 42U 800 x 800 Front Glass/Back Perf Door
FEATURES
Intelligent design ensures easy installation
Cable entry through bottom and top panel
180 degree turning angle for front door
Toughened glass door
Removable side panel provides easy maintenance
19” installation
Plinth (optional)Material SPCC cold rolled steel
Deg. of Protection IP20
Surface finish
Material thickness Mounting profile: 2.0 mm, Angel: 1.5 mm, Other: 1.2 mm
Loading capacity 800 KGS
Degreasing, phosphoric, powder coated$ 816.84$ 871.29
SCSSFTPC6APEBK Cat6A cable roll PVC Opterna Cat6A 23AWG S/FTP PE 4P Cable 305mtr/Box Black
SCSSFTPC6APEBK Opterna
DESCRIPTION
Opterna Category 6A 4-pair S/FTP copper cable forms the foundation of 10 Gigabit Ethernet networks. The cable exceeds Category 6A performance ensuring reliability in delivering 10G network speed and high data throughput.
The category 6A solid cables (S/FTP) has been designed for indoor applications fully supporting the more demanding office and industrial communications requirements including voice, data, VoIP, Video Conferencing, security, IP based cameras and other demanding real-time applications. The cable covers the category 6A requirements for shielded twisted pair cables of 100 Ω and is characterized up to 500 MHz suitable for transmitting data over local area networks (LANs).
The cable’s 8 conductors (4-Pairs) are of solid bare copper with skin-foam polyethylene (PE) insulation and a PVC/LSZH jacket. The two insulated conductors are twisted together to form a pair and the four pairs with its unique pair lay are bundled up to form the basic cable unit. Each twisted pair shielded with an aluminum foil to add physical separation between the four pairs and prevent internal cross talk.
All four pairs are covered with an overall braided screen to provide immunity from electromagnetic interference. Category 6A S/FTP cables provides better immunity and covers a wider spectrum of low frequency with the braided shield and high frequency immunity with the foil shield.
$ 304.95
ATEN CS1792-AT-E
ATEN CS1792-AT-E
ATEN :-2Port USB HDMI KVMP Switch
$ 255.94ATEN CS1792-AT-E
$ 255.94
SCSUUTPC6ALSZHGY Cat6A cable roll PVC Opterna Cat6A 23AWG U/UTP LSZH 4P Cable 305mtr/Box Grey
SCSUUTPC6ALSZHGY Opterna
DESCRIPTION
Opterna Category 6A 4-pair U/UTP copper cable forms the foundation of 10 Gigabit Ethernet networks. The cable exceeds Category 6A performance ensuring reliability in delivering 10G network speed, low BER and high data throughput.
Opterna 4 pair category 6A solid cables (U/UTP) has been designed for indoor applications fully supporting the more demanding office and industrial communications requirements including voice, data, VoIP, Video Conferencing, security, IP based cameras and other demanding real-time applications.
The cable covers the category 6A requirements for twisted pair cables of 100 Ω and is characterized up to 500 MHz suitable for transmitting data over local area networks (LANs).
The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a PVC/LSZH jacket. The two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit.
Standards
• UL 444
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class EA
• CENELEC EN 50173-1:2011
• IEC 61156-5
• EN 50288-11-1$ 238.24FDBSCSX048 Opterna Indoor Wallmount fiber Distribution Box 48Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.60FDBDCSX048 Opterna Indoor Wallmount fiber Distribution Box 48 Port ST D-Cut Unloaded with splice cassette on both side
FDBDCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.60SCSUTP4C6PEBK Opterna Cat6 Solid 23AWG UTP PE 4Pair Outdoor Cable 305m/Reel Black
SCSUTP4C6PEBK Opterna
DESCRIPTION
Opterna 4-pair unshielded category 6 solid cables (U/UTP) has been designed for outdoor applications and is suitable for outdoor duct installations. The cable supports 1G Ethernet networking, fully supporting the more demanding office communications including voice, data, VoIP, Video Conferencing, Security, IP based cameras and other demanding real time applications. The cable covers the category 6 requirements for unshielded twisted pair cables of 100 Ω and is characterized up to 250 MHz suitable for transmitting data over local area networks (LANs). The cable’s 8 conductors (4-Pairs) are of solid bare copper with high density polyethylene (HDPE) insulation and a UV stabilized polyethylene (PE) weather resistant jacket. Two insulated conductors are twisted together to form a pair and the four pairs with different twist ratio are laid up to form the basic cable unit. The four pairs are wrapped with an overall polyester tape for extra protection.
Applications
• Outdoor Cabling
• 4/16 Mbps Token Ring (IEEE 802.5)
• 10/100/1000 BASE-T (IEEE 802.3)
• 155 Mbps 1.2G ATM
• 100 Mbps TP-PMD
• Analogue Voice, ISDN, ADSL
• HVAC alarm systems and other signallingStandards
• ANSI/TIA-568-C.2
• ISO/IEC 11801:2011 (Ed 2.2) Class E
• IEC 61156-5
• CENELEC EN 50173-1:2011
• EN50288-6-1$ 171.54FDBSCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37FDBSCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37FDBDCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port ST D-Cut Unloaded with splice cassette on both side
FDBDCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design – a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37
