MAX-720C-Q1- QUAD-XX EXFO QUAD OTDR Module
EXFO MAX-720C-Q1- QUAD-XX
DESCRIPTION
MAX-720C, QUAD OTDR Module
Port 1: 850/1300 nm, 27/29 dB (50/125 & 62.5/125 Ī¼m)Port 2: 1310/1550 nm 36/35 dB (9/125 Ī¼m)
$ 12,366.92MAX-720C-Q1- QUAD-XX EXFO QUAD OTDR Module
$ 12,366.92
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to theĀ enclosure The mechanical sealing system perfectly fits Cables Blowing technology.$ 571.79
N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
N890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated ļ¬bres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well ļ¬xed around the splice and the metal wire provides strength so that the splice is well protected.$ 137.71N42i.101 Nexans DIN-Rail Outlets and Boxes
NEXANSĀ
Ā· For DIN-Rail mount (35mm)
Ā· Data connection for the industry
Ā· For up to 6 copper of fibre optic Snap-In connectors (not included)
Ā· Splice trays as accessories
Ā· For technical enclosures, Wireless Access Points, Industrial cabinets
Ā· Snap-In connectors not includedĀ· Robust metal body, powder coated
Ā· IP20 protection rating with individual dust shutters
Possibility of Individual port colour coding through coloured shutter
Ā· up to 6 LANmark RJ45 or GG45 Snap-In jacks
Ā· up to 6 SC Snap-In couplers (6 fibres)
Ā· up to 3 SC duplex Snap-In couplers (6 fibres)
Ā· up to 6 LC duplex Snap-In couplers (12 fibres)
Ā·
Ā· Mix of copper jacks and optic adapters possible
Ā· Strain release through cable gland or tie wraps
Ā· Removable (screws) side cover
Type of cables
Ā· Shielded Industrial Category 6 and 7 data cables, AWG 24 to AWG23
Ā· Fiber optic cables up to 15mm diameter
Ā· Simplex – Duplex and breakout fibre optic cables
Ā· Tight buffer or loose tube fibre optic cables
Ā· Pre-terminated cables$ 127.70
ACT4P6UCM3RBBU Schneider Category6, 4pr UTP Cable 305m Blue
Schneider ACT4P6UCM3RBBUĀ
Category6, 4pr UTP Cable 305m Blue
Description
Range Actassi
Product or component type Copper cable
Colour tint Blue
Cable shielding type U/UTP
Complementary
Type of cable 4 pair cables
Communication network category 6
Minimum return loss 19.4 dB 0.772 MHz$ 121.98N439.4SNB Nexans LANmark-OF Sliding Patch Panels
N439.4SNB Nexans
DESCRIPTION
Application
Accepting the range of ST couplers or LANmark-OF snap-ins, these patch panels with sliding mechanism facilitate front side installation.
Compatibility
Suitable for tight buffer cables (direct termination) , Loose tube cables using Splice Cassette / pigtailed terminations. Accepts pre-terminated cable assemblies.$ 78.96$ 83.05N439.4SNB Nexans LANmark-OF Sliding Patch Panels
$ 78.96$ 83.05
ACTPP6U24NSS_SE Schneider Actassi C6 UTP PP 24 P 1U loaded
Schneider ACTPP6U24NSS_SE
Actassi C6 UTP PP 24 P 1U loaded
DESCRIPTION
Range of product Actassi
Product or component type Patch panel
Device application Communication
Device presentation Loaded
Provided equipment With RJ45 connectors
Rear cable manager
Front label holder 3
Cable fixing hardware
Mounting hardware
Retaining cap
With shutter
Colour tint Front plate blue glossy
Colour code 568 A/BNumber of port 24 port of UTP
Product compatibility standard 19″ cabinet/rack
AWG gauge AWG 24…AWG 22Number of rack unit 1U
Plug, socket, control station shape Straight$ 66.71N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04N116.P1A200OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 20m Orange
N116.P1A200OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system ļ¬exibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retroļ¬t Latch Protector, which can be used for colour coding of different services.$ 27.23N102.105BK Nexans 1HU Patch Guide with Rings, Black
Nexans
Patch Guides, Blank Panels & Cable Management
Ā· Patch guides to manage and store all patch cords.
Ā· 1 HU and 2 HU for high density.
Ā· 1 HU with rings for easy access.
Ā· Cable guide for all patch panels without clip-on.$ 14.70
ACTRJ1UCMPC Schneider Cable Manager Deep Assy
Ā Schneider ACTRJ1UCMPC
Cable Manager Deep Assy
DESCRIPTION
Product 19ā patchcord guiding panel
Colour Dark grey
Complementary
Rack unit 1U
Width 482 mm
Height 43 mm
Depth 100 mm$ 13.07N890.090 Nexans LANmark-OF Splice Cassette Heat Shrink Protectors
N890.090 Nexans
DESCRIPTION
Family of patch panel accessories for termination of cable when using fusion splicing techniques. The cassette protects the fusion splices and holds them in position. The splice cassettes with heatshrink protectors can be used for both 250 and 900 Āµm coated ļ¬bres. Hence these cassettes are compatible with LANmarkĀOF Tight Buffer, Loose Tube and MicroĀBundle cables. Splicing with heat shrink protectors can also be used for both LANmark OF Maxistrip and Tight Buffer Pigtails. The cassettes have 12 splice positions. When using LANmarkĀOF Maxistrip Pigtails 2 protectors can be stacked on top of each other increasing capacity to 24 splices per cassette. The Nexans ļ¬bre panels can hold up to 4 splice cassettes and only the top splice cassette needs a cover. The large splice cassettes (N890.090, N890.091 and N890.092) can be installed in the LANmarkĀOF patch panels (N439.*) and LANsense OF sliding preloaded patch panels (N883.2B*). TheĀ spliceĀ cassettesĀ areĀ ļ¬xedĀ toĀ eachĀ otherĀ atĀ theĀ backĀ ofĀ theĀ cassettesĀ withĀ the
provided hinges. This feature facilitates the inspection after installation since the cassettesĀ canĀ beĀ liftedĀ andĀ tilted.
The cassette facilitates 2 rings of routing: an inner ring for the ļ¬bres of the pigtails and an outer ring for the ļ¬bres of the cable.$ 12.44
