SRT10KRMXLI APC Smart-UPS SRT 10000VA RM 230V
APC SRT10KRMXLIÂ
SMART-UPS SRT 10000VA RM 230V
DESCRIPTION
High density, double-conversion on-line power protection with scalable runtime
• Includes: CD with software, Documentation CD, Installation guide, Rack Mounting
brackets, Rack mounting hardware, Rack Mounting support rails, Temperature
Probe, USB cable, Warranty card, Web/SNMP Management Card$ 6,433.69
SRT10KXLI APC Smart-UPS SRT 10000VA 230V
APC SRT10KXLI
Smart-UPS SRT 10000VA 230V
DESCRIPTION
• High density, double-conversion on-line power protection with scalable runtime
• Includes: CD with software, Documentation CD, Installation guide, Temperature
Probe, USB cable, Warranty card, Web/SNMP Management CardBattery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leak-proof
Typical recharge time 1.5hour(s)
Nominal Battery Voltage +/-192 V (split battery referenced to neutral)$ 6,221.85SRT10KXLI APC Smart-UPS SRT 10000VA 230V
$ 6,221.85
SRT3000RMXLI APC Smart-UPS SRT 3000VA RM 230V
 APC SRT3000RMXLI
Smart-UPS SRT 3000VA RM 230V
DESCRIPTION
• High density, double-conversion on-line power protection with scalable runtime
Interface Port(s) RJ-45 Serial, Smart-Slot, USB
Control panel Multi-function LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severity$ 2,768.81
SMX3000RMHV2UNC APC Smart-UPS X 3000VA
APC SMX3000RMHV2UNC
Smart-UPS X 3000VA
Output
Output Power Capacity 2700 Watts / 3000 VA
Max Configurable Power (Watts) 2700 Watts / 3000 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 5%
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Other Output Voltages 208, 220, 240V
Other Output Voltages Line Interactive
Waveform Type Sine wave
Output Connections (1) IEC 320 C19 (Battery Backup) , (2) IEC Jumpers (Battery Backup) , (8) IEC 320 C13 (Battery
Backup)Input
Nominal Input Voltage 208V
230VInput Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections British BS1363A , IEC-320 C20 , Schuko CEE 7/EU1-16P
Cord Length 2.44 meters
Input voltage range for main
operations
140 – 280 V
Other Input Voltages 220 , 240
Transfer Time 2-4 ms
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement Battery APCRBC117
RBC Quantity 1$ 2,314.37SMX3000RMHV2UNC APC Smart-UPS X 3000VA
$ 2,314.37
5509131 RITTAL Cabinet TS IT RAL7035 WHD 800x2000x1000 42U
RITTAL 5509131
TS IT RAL7035 WHD 800x2000x1000 42U
DESCRIPTION
Basic material Sheet steel
Dimensions Width: 800 mm
Height: 2000 mm
Depth: 1000 mm$ 1,706.10
760031674 COMMSCOPE LazrSPEED® Indoor/Outdoor Low Smoke Zero Halogen Riser Distribution Cable, 8 Fiber Single-unit
 COMMSCOPE 760031674 (1000 mtr)
LazrSPEED® Indoor/Outdoor Low Smoke Zero Halogen Riser Distribution Cable, 8 Fiber Single-unit
General Specifications
Cable Type Distribution
Construction Type Non-armored
Fiber Type, quantity 8
Jacket Color Black
Total Fiber Count 8
Dimensions
Diameter Over Jacket 6.3 mm | 0.248 inProduct Type Fiber indoor/outdoor cable
$ 1,633.68
AR3100 APC NetShelter SX 42U Server Rack Enclosure 600mm x 1070mm w/ Sides Black
 APC AR3100
NetShelter SX 42U Server Rack Enclosure 600mm x 1070mm w/ Sides Black
Description
Standard enclosure for low to medium density server and networking applications. Compact width to
optimize data center space. 42U height to easily roll through doorways.
Model Name APC NetShelter SX 42U Server Rack Enclosure 600mm x 1070mm w/ Sides Black$ 1,562.88
DK 5507.131 RITTAL Cabinet WHD: 800x2000x800 mm, 42 U Glazed Alumunium Door at the Front
RITTAL DK 5507.131
Product description
Material: Sheet steel
Aluminium
Glazed aluminium door with 3 mm single-pane safety glass
Surface finish: Enclosure frame: Dipcoat-primed
Interior installation: Dipcoat-primed
Doors and roof: Dipcoat-primed, powder-coated
Colour: Enclosure frame and panels: RAL 7035
Interior installation: RAL 9005
Protection category
IP to IEC 60 529:
IP 55 only in conjunction with baying seal or screw-fastened side panels
Supply includes: TS 8 enclosure frame with doors and roof plate
Glazed aluminium door at the front, 180° hinges
Sheet steel door at the rear, 180° hinges
Lock front and rear: Comfort handle for semi-cylinders and security lock 3524 E
Roof plate, one-piece, solid
Base tray and gland plate, multi-piece, solid
Two 482.6 mm (19″) mounting frames, front and rear, depth-variable
Baying seal and sealing kit for gland plates (supplied loose)
Connection accessories for potential equalisation with earthing point (supplied loose)
50 multi-tooth screws M5, cage nuts M5, conductive (supplied loose)
IPPC pallet
Note: Depending on how and where it is sited, the door opening angle may vary for selected
applications
For enclosures with height and depth 2000 x 1200 mm / 2200 x 1000 mm / 2200 x 1200 mm,
the matching side panels are optionally available and are supplied fitted to the enclosure
Basic material: Sheet steelProduct features
Dimensions: Width: 800 mm
Height: 2000 mm
Depth: 800 mm
Installation height for
components:
42 U
Distance between
levels as delivered:
545 mm
Load capacity: 482.6 mm (19″) level: 10000 N
Packs of: 1 pc(s).
Weight/pack: 128 kg$ 1,469.39760201129 | 360-iP-1100-E-GS6-2U-48 COMMSCOPE Cat6A U/UTP Patch Panel, 48 Port
COMMSCOPE 760201129 | 360-iP-1100-E-GS6-2U-48
SYSTIMAX 360™ iPatch® 1100GS6 Evolve U/UTP Patch Panel, 48 Port
General Specifications
ANSI/TIA Category 6A
Cable Type Unshielded
Color Silver
Intelligence Type iPatch® enabled
Rack Units 2
Total Ports, quantity 48
Wiring T568A | T568B
Dimensions
Height 89.66 mm | 3.53 in
Width 482.6 mm | 19 in
Depth 206.5 mm | 8.13 in
Compatible Diameter Over Dielectric, maximum 1.168 mm | 0.046 in
Electrical Specifications
Current Rating at Temperature 1.5 A @ 20 °C | 1.5 A @ 68 °F
Dielectric Withstand Voltage, RMS, conductive surface 1,500 Vac @ 60 Hz
Insulation Resistance, minimum 500 MOhm$ 1,265.68$ 1,406.31760201129 | 360-iP-1100-E-GS6-2U-48 COMMSCOPE Cat6A U/UTP Patch Panel, 48 Port
$ 1,265.68$ 1,406.31
5529131 RITTAL Cabinet WHD 600x2000x600 42U
RITTAL 5529131
Cabinet WHD 600x2000x600 42U
Technical
Note Depending on the siting type and location, the door opening may vary for selected
applications
For enclosures with height and depth 2000 x 1200 mm / 2200 x 1000 mm / 2200 x 1200
mm, the matching side panels are optionally available and are supplied fitted to the
enclosure
Material Sheet steel
Aluminium
Glazed aluminium door with 3 mm single-pane safety glass
Surface finish Enclosure frame: Dipcoat-primed
Interior installation: Dipcoat-primed
Doors and roof: Dipcoat-primed, powder-coated
Colour Enclosure frame and panels: RAL 7035
Interior installation: RAL 9005
Protection category IP to IEC 60 529 IP 55 only in conjunction with baying seal or screw-fastened side panels
Supply includes TS 8 enclosure frame with doors and roof plate
Glazed aluminium door at the front, 180° hinges
Sheet steel door at the rear, 180° hinges
Lock front and rear: Comfort handle for semi-cylinders and security lock 3524 E
Roof plate, one-piece, solid
Base tray and gland plate, multi-piece, solid
Two 482.6 mm (19″) mounting frames, front and rear, depth-variable
Baying seal and sealing kit for gland plates (supplied loose)
Connection accessories for potential equalisation with earthing point (supplied loose)
50 multi-tooth screws M5, cage nuts M5, conductive (supplied loose)
IPPC pallet
Basic material Sheet steel
Dimensions Width: 600 mm
Height: 2000 mm
Depth: 600 mm
Installation height for components 42 U
Distance between levels as delivered 345 mm
Load capacity 482.6 mm (19″) level: 10000 N
Packs of 1 pc(s).
Weight/pack 93 kg
EAN$ 1,257.405529131 RITTAL Cabinet WHD 600x2000x600 42U
$ 1,257.40
SRT192BP2 APC Smart-UPS SRT 192V 8kVA and 10kVA Battery Pack
 APC SRT192BP2
Smart-UPS SRT 192V 8kVA and 10kVA Battery Pack
DESCRIPTION
Operating Temperature 0 – 40 °C
Operating Relative Humidity 0 – 95 (no %
Operating Elevation 0-3000meters
Storage Elevation 0-15000meters$ 1,163.72
TE 7888.892 RITTAL Cabinet 42U Width: 800 mm Height: 2000 mm Depth: 1000 mm
RITTAL TE 7888.892
Product description
Benefits: No frame structure
Optimum accessibility
Readily dismantled and therefore easily installed
Material: Sheet steel
Surface finish: Mounting frame: Dipcoat-primed
Enclosure panels: Powder-coated
Colour: RAL 7035
Protection category
IP to IEC 60 529:
IP 20
Supply includes: Self-supporting 482.6 mm (19″) mounting frames, front and rear, depth-variable
Sheet steel door vented (vented surface area > 67%), front with designer handle, 130° hinge,
security lock 3524 E
Sheet steel door vented (vented surface area > 67%), rear with 130° hinge, security lock 3524E
Base frame with maximum cut-out (for optional population with module plates)
Roof plate including concealed cut-out for cable entry and optional fan
4 levelling feet, M10 (supplied loose)
4 spacers, 20 mm (supplied loose) to raise the roof plate 4 Baying kit
Basic material: Sheet steel
Product features
Dimensions: Width: 800 mm
Height: 2000mm Depth: 1000 mmInstallation height for components:42 U
Distance between
levels as delivered:745 mm
Load capacity: 7000 N
Packs of: 1 pc(s).
Weight/pack: 81 kg$ 1,089.40
