N420.66A Nexans LANmark-6A Snap-In Connector
N420.66A Nexans
DESCRIPTION
Application
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the latest Category 6A speciļ¬cations deļ¬ned in the International and American cabling standards and are designed to meet or exceed the stringent quality and performance criteria needed to support all applications up to 500 MHz, including 10 Gigabit Ethernet. A fully closed metal rear cover providing 360 degrees shielding offers excellent coupling attenuation and ensures immunity from Alien Crosstalk and other external interferences. Channels built with LANmark-6A cables and jacks do not need on site testing for Alien Crosstalk, as this parameter is met by design. This signiļ¬cantly reduces the installation
cost for 10G network cabling.ā¢ 10 BASE-T Ethernet
ā¢ 100 BASE-T Fast Ethernet
ā¢ 1000 BASE-T Gigabit Ethernet
ā¢ 10G BASE-T Gigabit Ethernet IEEE 802.3
ā¢ 155 Mbit ATM
ā¢ 1.2 Gbit ATM
PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC 60512-99-002/ed.1 draft (test 99b).$ 6.26
N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
N890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated ļ¬bres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well ļ¬xed around the splice and the metal wire provides strength so that the splice is well protected.$ 137.71N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04SCSAFPUK1WH Opterna Angular Faceplate 86 x 86 mm for 1 Keystone Jack, U.K Standard
SCSAFPUK1WH Opterna
DESCRIPTION
Opterna Angled faceplates are manufactured of flame retardant and high-quality plastics which ensure product durability. The faceplate is available in 1 or 2 port configurations.
The angled design of faceplate maintains the patch cords bend radius and provide less stain on the keystone jack. Also, by means of the angled design the faceplate provides extra room inside the back box for storage of cable.
Part of the design is the integrated label holder which allows the installer to fix labels and hence making the faceplate TIA 606 compliant. The faceplate comes with an in-built shutter to prevent dust and dampness protection.
The angled faceplate is highly recommended for Category 6A unshielded / shielded installations.
Standards
ā¢ ANSI/TIA-568-C.2
ā¢ ISO/IEC 11801:2011 (Ed 2.2)
ā¢ CENELEC EN 50173-1:2011
ā¢ UL 94 V-0$ 1.36
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to theĀ enclosure The mechanical sealing system perfectly fits Cables Blowing technology.$ 571.79FDBSCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design ā a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37FDBSCSX048 Opterna Indoor Wallmount fiber Distribution Box 48Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design ā a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.60FDBSCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port SC Simplex Unloaded with splice cassette on both side
FDBSCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design ā a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37FDBDCSX048 Opterna Indoor Wallmount fiber Distribution Box 48 Port ST D-Cut Unloaded with splice cassette on both side
FDBDCSX048 Opterna
DESCRIPTION
The FDB-48 provides 16, 24, 32 or 48 SC ports in a traditional two-layer design ā a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-48 is suitable for indoor or outdoor FTTx applications that support up to 48 subscribers. It has a durable wall-mountable housing with a weatherproof gasket and weatherproof PG gland entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports
$ 190.60FDBDCSX024 Opterna Indoor Wallmount fiber Distribution Box 24 Port ST D-Cut Unloaded with splice cassette on both side
FDBDCSX024 Opterna
DESCRIPTION
The FDB-24 provides 8, 16 or 24 SC ports in a traditional two-layer design ā a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports.
The FDB-24 is suitable for indoor or outdoor FTTx applications that support up to 24 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and two PG16 weatherproof cable entry/exit ports. It easily accommodates 3 splitters, 24 splices and 24 SC ports.
$ 163.37
CAFCU09OS2TBL015YL Opterna OS2 FC/UPC T/Buff fiber 900um Pigtail 1.5mtr
CAFCU09OS2TBL015YL Opterna
DESCRIPTION
Opterna offers high performance patchcords and pigtails for use in all types of fiber optic networks. The Opterna patchcords & pigtails are manufactured using state-of-the-art controlled manufacturing processes to operate over the full range of singlemode and multimode wavelengths.
Opterna patchcords and pigtails are terminated with high quality connectors, which provide low insertion loss and high return loss. Each patchcord or pigtail is individually tested and supplied with test certificates. The unique serial number provides traceability of every single product.
$ 4.49CASTU09OS2TBL015YL Opterna OS2 ST/UPC T/Buff fiber 900um Pigtail 1.5mtr
CASTU09OS2TBL015YL Opterna
DESCRIPTION
Opterna offers high performance patchcords and pigtails for use in all types of fiber optic networks. The Opterna patchcords & pigtails are manufactured using state-of-the-art controlled manufacturing processes to operate over the full range of singlemode and multimode wavelengths.
Opterna patchcords and pigtails are terminated with high quality connectors, which provide low insertion loss and high return loss. Each patchcord or pigtail is individually tested and supplied with test certificates. The unique serial number provides traceability of every single product.
$ 4.36
