No products in the cart.
N420.66A Nexans LANmark-6A Snap-In Connector
N420.66A Nexans
DESCRIPTION
Application
Nexans LANmark-6A Evo Snap-In Connectors are manufactured and tested to the latest Category 6A speciļ¬cations deļ¬ned in the International and American cabling standards and are designed to meet or exceed the stringent quality and performance criteria needed to support all applications up to 500 MHz, including 10 Gigabit Ethernet. A fully closed metal rear cover providing 360 degrees shielding offers excellent coupling attenuation and ensures immunity from Alien Crosstalk and other external interferences. Channels built with LANmark-6A cables and jacks do not need on site testing for Alien Crosstalk, as this parameter is met by design. This signiļ¬cantly reduces the installation
cost for 10G network cabling.ā¢ 10 BASE-T Ethernet
ā¢ 100 BASE-T Fast Ethernet
ā¢ 1000 BASE-T Gigabit Ethernet
ā¢ 10G BASE-T Gigabit Ethernet IEEE 802.3
ā¢ 155 Mbit ATM
ā¢ 1.2 Gbit ATM
PoE++ Type 4 (IEEE 802.3bt) including IEC 60512-9-3/ed.2 (test 9c) and IEC 60512-99-002/ed.1 draft (test 99b).$ 6.26
N890.021 Nexans LANmark-OF Fusion Splice Heat Shrink Protection 45mm 100x
N890.021 Nexans
DESCRIPTION
LANmark OF-accessories to complete the splicing system with heat shrink protectors 100 pieces per bag
Lenght: 45mm Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated ļ¬bres. Compatible with tight buffer and maxistrip pigtails Designed for LANmark-OF Splice Cassette Heat Shrink Protectors (N890.090 and
N890.095) The heat shrink splice protector consists of a metal rod surrounded by a shrinkable plastic. The splice is inserted into the shrinkable plastic. After heating the plastic is well ļ¬xed around the splice and the metal wire provides strength so that the splice is well protected.$ 137.71N521.661BK Nexans Patch Panel 24 Snap-In Fixed Black
N521.661BK Nexans
DESCRIPTION
Nexans Snap-In range of patch panels are designed to accomodate any of the Snap-In connectors in the LANmark product family (LANmark-7A, LANmark-7, LANmark-6A, LANmark-6, and LANmark-5). The Snap-In panels feature an exclusive Clip-On system to secure the connector in the panel and to provide a simple means of earthing shielded connectors to facilitate installation. Connection of the panel to earth is achieved with a unique Auto-Connect
feature removing the need for individual bonding conductors. The panels also have a series of complementary cable management products such as blank panels and patch cord guides.
The patch panels are designed for standard 19″ enclosures, are 1U high, and support the following common features:
– 24 Ports with shutters
– Designed for Screened and Unscreened Snap-In connectors
– Compatible with all performance categories of connector
– Clip-On mechanism for simple earthing
– Exclusive rear cable management facilities
– Robust construction
– Printed numbering for port labelling
This panel features vertical “T” clips for rapid cable retention which allows loading of the panel in around 25% of the time needed to fasten tie wraps which leads to time saving during installation.$ 31.04
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to theĀ enclosure The mechanical sealing system perfectly fits Cables Blowing technology.$ 571.79
N424.532 Nexans UK Style Backbox Single Gang White
NexansĀ N424.532Ā
UK Style Backbox Single Gang White
DESCRIPTION
LANmark Snap-In Modules in standard UK styles
Ā· 25 x 50 mm angled and flat shuttered modules for 1 LANmark Snap-In connector
Ā· LJ6C angled and flat shuttered modules for 1 LANmark Snap-In connector
Ā· 50 x 50 mm angled shuttered modules for 2 LANmark Snap-In connectors$ 2.45N116.P1A200OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 20m Orange
N116.P1A200OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system ļ¬exibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retroļ¬t Latch Protector, which can be used for colour coding of different services.$ 27.23N116.P1A050OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 5m Orange.
N116.P1A050OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system ļ¬exibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retroļ¬t Latch Protector, which can be used for colour coding of different services.$ 11.71N116.P1A030OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 3m Orange.
N116.P1A030OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system ļ¬exibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. . LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retroļ¬t Latch Protector, which can be used for colour coding of different services.
$ 7.02N116.P1A020OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 2m Orange
N116.P1A020OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system ļ¬exibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retroļ¬t Latch Protector, which can be used for colour coding of different services.
$ 6.81N205.624 Nexans LANmark-OF Duplex SC Snap-In Adaptor Singlemode
N205.624 Nexans
DESCRIPTION
LANmark-OF Snap-In adapters have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices.
$ 8.20N123.4MCY Nexans LANmark-OF Pigtail SC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
N123.4MCY Nexans
DESCRIPTION
Pigtail characteristics
ā¢ FibreĀ assemblyĀ toĀ terminateĀ cableĀ withĀ fusionĀ splicing
ā¢ SuitableĀ forĀ useĀ inĀ patchĀ panelsĀ usingĀ spliceĀ cassettes.
ā¢ The pigtails can be stripped in one action over a long distance up to 100cm.Fibre type
The LANmarkĀOF SM pigtails have LANmarkĀOF SM GIGAliteFLEX ļ¬bre inside.Ā Ā These ļ¬bres are bend insensitive and compliant to ITUĀT G.657.A1 and to IEC 60793Ā2Ā50, ļ¬bre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
- Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095)Ā withĀ heatĀ shrinkĀ protectorsĀ (N890.021).
- Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) withĀ AluminiumĀ protectorsĀ (N890.021).
- Maxistrip pigtails are recommended to be used with loose tube cables or MicroĀBundle cables, i.e. with 250 um ļ¬bres. When using tight buffer cables (900 um ļ¬bres) additional stress on the maxistrip pigtails should be limited as much as possible
- For proper alignment in the fusion splice tool the pigtail is ļ¬xed on the 250 um coating after stripping the 900 um coating.Ā Ā Fixing the pigtail on the 900 um coating willĀ leadĀ toĀ improperĀ alignment.
- In addition the pigtail needs to be stripped till the cladding around the splice area beforeĀ insertionĀ inĀ theĀ spliceĀ tool.
$ 5.72N121.4MLY Nexans LANmark-OF Pigtail LC/UPC Singlemode Maxistrip LSZH 9/125 1m Yellow
N121.4MLY Nexans
DESCRIPTION
Pigtail characteristics
ā¢ FibreĀ assemblyĀ toĀ terminateĀ cableĀ withĀ fusionĀ splicing
ā¢ SuitableĀ forĀ useĀ inĀ patchĀ panelsĀ usingĀ spliceĀ cassettes.
ā¢ TheĀ pigtailsĀ canĀ beĀ strippedĀ inĀ oneĀ actionĀ overĀ aĀ longĀ distanceĀ upĀ toĀ 100cm.Fibre type
The LANmarkĀOF SM pigtails have LANmarkĀOF SM GIGAliteFLEX ļ¬bre inside.Ā Ā These ļ¬bres are bend insensitive and compliant to ITUĀT G.657.A1 and to IEC 60793Ā2Ā50, ļ¬bre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.
Compatibility and installation practices
Maxistrip pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protectors (N890.021).
Maxistrip pigtails are compatible with splice cassettes (N890.091 and N890.096) withĀ AluminiumĀ protectorsĀ (N890.021).
Maxistrip pigtails are recommended to be used with loose tube cables or MicroĀ Bundle cables, i.e. with 250 um ļ¬bres. When using tight buffer cables (900 um ļ¬bres) additional stress on the maxistrip pigtails should be limited as much as possible
For proper alignment in the fusion splice tool the pigtail is ļ¬xed on the 250 um coating after stripping the 900 um coating.Ā Ā Fixing the pigtail on the 900 um coating willĀ leadĀ toĀ improperĀ alignment.
In addition the pigtail needs to be stripped till the cladding around the splice area beforeĀ insertionĀ inĀ theĀ spliceĀ tool.
$ 5.53
