3M VOL-6UP4-305 UTP Cable Cat 6 3M-305 MTR BOX
3M VOL-6UP4-305 UTP Cable Cat 6 3M-305 MTR BOX
3M UTP Cable Cat 6 3M-305 Mtr Box Belonging to the 3M Volition Network Solutions, this 350 MHz UTP Category 6 cable will deliver the best performance when used with the 3MTM RJ45 K6 jacks, to give highest margins over Category 6 / TIA/EIA 568 and ISO 11801 and EN 50173 Class E standards. Length markings on the cable sheath. Low smoke, zero halogen (LSOH) and PVC versions available Benefits.Good headroom over Category 6 performance. Installer friendly. Solutions for all levels of fire protection.
$ 114.36
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
Nexans Splice Closure WTC1.5 Watertight closure for Fibre optic Cables
DESCRIPTION
Sealing system:
Fully mechanical sealing system for reduced installation and re-entry time. The top shell, sealed with
a gasket, can be easily installed and removed without special tools or torque control. – Cable sealing devices based on a mechanical compression system: this allows re-using all components for future upgrade or re accessing to the enclosure The mechanical sealing system perfectly fits Cables Blowing technology.$ 571.79
N424.532 Nexans UK Style Backbox Single Gang White
Nexans N424.532
UK Style Backbox Single Gang White
DESCRIPTION
LANmark Snap-In Modules in standard UK styles
· 25 x 50 mm angled and flat shuttered modules for 1 LANmark Snap-In connector
· LJ6C angled and flat shuttered modules for 1 LANmark Snap-In connector
· 50 x 50 mm angled shuttered modules for 2 LANmark Snap-In connectors$ 2.45FWE-MOD-12-M-C AFL Modular DIN Rail Mounted Enclosure
AFL FWE-MOD-12-M-C
Modular DIN Rail Mounted Enclosure
DESCRIPTION
AFL specialises in the development of fibre optic enclosures to suit all environments and customer needs. We have developed a complete range to suit almost any application including 19” rack mounting, wall mounting, Defence style, IP-rated for outside
plant environments, industrial uses and for underground terminations.
Our extensive range of enclosures can accommodate a variety of installation applications including fusion splicing, directtermination, pre-terminated cables, MTP connectivity and pre-terminated copper cabling.
In addition, AFL can offer a customer tailored enclosure or cabinet solution to suit non-standard applications.$ 508.89VOL-FPUK-2K 3M (2P 86*86mm UK Faceplate) W/O Shutter Doors, W/window label
3M VOL-FPUK-2K
(2P 86*86mm UK Faceplate) W/O Shutter Doors, W/window label
DESCRIPTION
A wide range of face plates and boxes are available for the ‘K’
series Jacks which ensure easy fitting and smart presentation of
the RJ45 outlet. Vertical and 30° angled versions are offered in
local country adaptations giving the ability to surface or flush
mount. The Keystone mounting feature of the Jack may allow you to
use VF-45TM or other Keystone boxes or face plates.
Different colour options are available in some versions. A label
holder and white application icon (coloured icons are available) finish
the presentation to give a smart and functional appearance.
The choice of UTP, FTP or STP 360° braid or foil connection offers
you the required electromagnetic compatibility level you require.$ 3.54
VOL-PPCB-F24K 3M 24 Port UTP patch Panel – Unloaded
3M VOL-PPCB-F24K
24 Port UTP patch Panel – Unloaded
DESCRIPTION
High density modular concept
• Fully shuttered presentation when loaded
• Direct and individual earthing connection upon insertion
of jacks (FTP and STP 360° shielded jacks)
• Total shielding on STP 360° shielded jacks$ 47.65N116.P1A200OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 20m Orange
N116.P1A200OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.$ 27.23N116.P1A050OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 5m Orange.
N116.P1A050OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.$ 11.71N116.P1A030OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 3m Orange.
N116.P1A030OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. . LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 7.02N116.P1A020OK Nexans LANmark-6 Patch Cord Cat 6 Unscreened LSZH 2m Orange
N116.P1A020OK Nexans
DESCRIPTION
Application
LANmark-6 Patch Cords can be used to deliver a full end-to-end Class E solution. They provide improved data throughput and allow for the inclusion of a cross-connect or Consolidation Points for maximum system flexibility. They will also maximise the lifetime and long term performance of the system by minimising the risk of wear & tear damage which can be caused by using non-matched cords. LANmark-6 Cords feature a slim over-moulded boot which is kept inside the RJ45 boundaries to enable High Density Patching with 48 cords in 1 height unit. They also come with a Retrofit Latch Protector, which can be used for colour coding of different services.
$ 6.81VOL-OCK6-U 3M RJ45 K6 Jack, Category 6, UTP, White
3M VOL-OCK6-U
Description
• Tool-less jack … easy and quick to install
… fast reliable connection in record time: all 8 copper conductors are effortlessly
wired in a single operation
… quality of connection by design: not dependant on tool condition or operator skills,
just listen for the click
… consistent results: the length of untwisted pairs and the length between the end of the
conductor and the IDC contacts are always kept to a minimum, by design
• Re-usable … if a wiring mistake is made there is no need to use a new jack
… no time wasted waiting for another delivery
• Shallow depth, cable entry from
top or bottom
… easier cable management
… more space and flexibility to ensure the cable minimum bend radius is never compromised
– allows a wide range of cable routing options
– can be used with low profile trunking and boxes
• Keystone mounting … compatibility between Volition copper and fibre jacks and many other accessories on the market
using the standard keystone mounting
• UTP, FTP and STP 360° shielded versions
have the same ‘one-click’ tool-less design
… solutions for all levels of EMC protection using the same accessories means less training
• Accepts both solid conductors from AWG
26 to 22 and stranded conductors
… compatible with all cables on the market and enables ‘jack to plug’ cables to be manufactured
using stranded conductors (for use in open office architectures)
• Integral shutter … increased dust protection, especially during installation or in a dirty environment
… no additional shuttering required on faceplates
… higher port density
… allows direct mounting into floor$ 16.34$ 27.23VOL-OCK6-U 3M RJ45 K6 Jack, Category 6, UTP, White
$ 16.34$ 27.23N205.624 Nexans LANmark-OF Duplex SC Snap-In Adaptor Singlemode
N205.624 Nexans
DESCRIPTION
LANmark-OF Snap-In adapters have been designed for installation into the LANmark- OF snap-in panels, ZD boxes and outlets. They are available in single SC, duplex SC and duplex LC duplex. The multimode adaptors are aqua, the singlemode adaptors are blue while the singlemode APC adaptors are green. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices.
$ 8.20
