7825361 RITTAL Cabinet DK Gland Plate Modules For ENC Braithwell Way,
RITTAL 7825361
DK GLAND PLATE MODULES FOR ENC
Description
For simple, sealed cable entry.
Note Several gland module plates need to be combined to close off the base completely in the
TS-IT
Material Sheet steel
Surface finish Zinc-plated
To fit TS
TS IT
SE
Width: 600 mm
Dimensions Depth: 237.5 mm
Packs of 1 pc(s).
Weight/pack 1.29 kg$ 40.30
TS- 8601.600 RITTAL Base/Plinth Components, Front and Rear, 100 mm Sheet Steel
RITTAL TS- 8601.600
Product description
Design: Solid
Description: Base/plinth component consisting of one trim panel and two pre-configured corner
pieces.
Material: Base/plinth components: Sheet steel
Cover caps: Plastic
Surface finish: Spray-finished
Colour: RAL 7022
Cover caps: RAL 9005
Supply includes: 2 base/plinth components
4 cover caps
Assembly partsDimensions: Height: 100 mm
Packs of: 2 pc(s).
Weight/pack: 4.17 kg$ 41.13
2500500 RITTAL Connection Cable
RITTAL 2500500
Connection Cable
Product Description
Version Infeed 3-pole (with socket without connector)
Description For simple time-saving connection of the LED system light.
Color Orange
Standards Mains connection cables: AVLV2
Mains connector: ECBT2
Dimensions 3000 mm (118 “)
Rated operating voltage 100V – 240V 1~ 50Hz/60Hz
Cross-section AWG 16
Packaging unit 1 pc(s).
Weight/packaging unit 0.35 kg (0.8 lb.)$ 41.392500500 RITTAL Connection Cable
$ 41.39
TS 8611.070 RITTAL Comfort Handle
RITTAL TS 8611.070 Comfort Handle
Product description
Version: For semi-cylinder
Description: As the handle does not take up any of the swivel range due to the folding technology, the door
surface can be used for equipment in the optimal manner.
Material: Die-cast zinc
Surface finish: Powder-coated
Color: RAL 7035
Mounting tip: The handle adapter is required when fitting to TS glazed door, PC lower door, IW designer door
Product features
Version: Note: Prepared for the installation of semi-cylinders with a total length of 40 or 45 mm (to DIN
18 252)
Suitable for: Enclosure type: EL 3-part 18 – 21 U
Enclosure type: TS
Enclosure type: TS IT
Enclosure type: SE
Enclosure type: PC enclosure door
Enclosure type: IW
Enclosure type: TS 8 stainless steel
Enclosure type: SE stainless steel
Packaging unit: 1 pc(s).$ 43.77
8620003 RITTAL Base/plinth corner piece with base/plinth trim panels, Front and Rear, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
RITTAL 8620003
Base/plinth corner piece with base/plinth trim panels, Front and Rear, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
Description:
High-load capacity base/plinth corner pieces with moulded self-positioning to the baying
enclosure system, may be used with or without trim panels depending on the
application. Large openings in the corner piece for optimum access to the screwfastening
point, may be concealed with a corner and baying cover.Product features
To fit: Enclosure type: VX
Width: = 800 mm
Dimensions: Height: 100 mm
Packs of: 2 pc(s).
© Rittal 2019 1
Weight/pack: 4.84 kg$ 46.29
7980.000 RITTAL Cabinet Fan Expansion Kit
Rittal DK 7980.000
Fan expansion kit
Description
For retro-fitting various fan units or to supplement the fan mounting plate and modular fan roof.
Supply includes: Assembly parts
Fan
Connection cable (0.61 m)
Packs of: 1 pc(s).
EAN: 4028177137752Air throughput
(unimpeded air flow):
At 50 Hz: 160 m³/h
At 60 Hz: 180 m³/h
Rated operating
voltage:230 V, 1~, 50 Hz/60 Hz
Dimensions: Width: 119 mm
Height: 119 mm
Depth: 38 mm
Temperature range: Operation (environment): -10°C…+55°C
Power consumption Pel:
At 50 Hz: 15 W
At 60 Hz: 14 W
Noise level: At 50 Hz: 37 dB(A)$ 46.37
8612280 RITTAL TS MOUNTING RAIL 18X38MM FOR
RITTAL 8612280
TS MOUNTING RAIL 18X38MM FOR
Description:
Simply locate and secure with a screw. Location system makes installation and removal easy.
Only needs to be secured on one side, but can be secured on both sides if necessary.
Material: Carbon steel
Supply includes: Assembly screwsPackaging unit: 4 pc(s).
Weight/packaging
unit:3.7 kg (8.1 lb.)$ 49.01
DK 7113.000 RITTAL Earth Rail, Horizontal
RITTAL DK 7113.000
Product description
Description: Current carrying capacity approx. 200 A.
Supply includes: Earth rail made from E-Cu 57 to DIN EN 12 163, DIN EN 13 601, 15 x 5 mm
20 connection points with M5 screws
2 earth connections 25 mm²
2 isolators
Assembly partsPacks of: 1 pc(s).
Product features
To fit: Enclosure type: TS
Width: 600 mm
800 mm
Length: 450 mm
Weight: 0.44 kg$ 51.73
1931200 RITTAL EL1931 1U BLANKING PLATE PKT-3
RITTAL 1931200
EL1931 1U BLANKING PLATE PKT-3
Description
To neatly finish off free locations within the mounting level.
Material Aluminium
Surface finish Natural anodised
Dimensions Width: 19″
Units 1 U
Packs of 3 pc(s).
Weight/pack 0.56 kg$ 51.73
8640003 RITTAL Base/Plinth corner Piece with Base/Plinth Trim Panels, Front and Rear, Optimised Design, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
RITTAL 8640003
Base/Plinth corner Piece with Base/Plinth Trim Panels, Front and Rear, Optimised Design, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW
Description
Enables cable entry from below and space-saving cable routing within the base/plinth For cabinet widths / depths: 800 mm Colour: RAL 9005 (black) Optimised design . Includes: 4 base/plinth corner pieces, height 100 mm 4 corner covers 1 baying cover 2 base/plinth trim panels for 800 mm wide/deep racks$ 52.82
5502530 RITTAL Gland Plate Multi-Piece 800×800
RITTAL 5502530
Gland Plate Multi-Piece 800×800
Technical
Design Gland plate, solid, with sliding panel, multi-piece
To fit Width: 800 mm
Depth: 800 mm
Packs of 1 pc(s).
Weight/pack 6.69 kg$ 57.18
7827480 RITTAL DK CORNER BRACKET (1PU=2EA)
RITTAL 7827480
DK CORNER BRACKET (1PU=2EA)
Description:
The installation bracket is screw-fastened in the enclosure width on the housing frame. The
profile rail is fastened to the bracket at the top and bottom. For partial enclosure configuration
the installation brackets can be fastened to the TS system chassis, 17 x 73 mm, on the outer
mounting level of the enclosure frame$ 65.35
